Could my router have too many connected devices?
Count every connected phone, tablet, laptop and Cure Puck. Some routers allow only a limited number of wireless clients. If your network is at capacity, disconnect unused devices or ask your IT team to increase wireless capacity.
Network troubleshooting, manual page 28My previously connected puck is offline
Turn it off for five seconds, then turn it back on. It will try to reconnect with its saved settings. Check that your router has internet access, the puck is within range and the network has room for all your devices.
Do not use Provision Mode just to reconnect: it creates a new device instance and disconnects the previous history.
Operating manualThe Wi-Fi name or password changed
In the app, select the puck → Information → More Options → Reconfigure. Follow the connection prompts. Reconfigure retains the existing device record and its history.
Operating manualI’m adding a brand-new Cure Puck
- Install the Cure Puck app. Sign up, confirm your email and name your organization.
- Choose Add Device in the app.
- On the puck, select Settings → Network → Provision Mode.
- Follow the app prompts to connect to the device and select your network.
- Save the network credentials in the app to set up additional pucks.
The account email never arrived
Check your spam folder. Ask your IT team to allow noreply@curepuck.io; corporate mail filters can block it before it reaches your inbox.
I see an alert on the puck, but receive no notification
Enable each required device alert. Then use the web dashboard to configure email/SMS recipients and notification frequency. Device alerts alone do not send email or SMS. Check phone notification permissions for app alerts.
Dashboard loginWhat does our IT team need?
Provide internet access and enough wireless client capacity for the whole fleet. The supplied security overview specifies TLS 1.2/1.3 on port 443, with 9443 as an alternative. Local curing can continue without internet; remote monitoring requires it.
Cloud security overviewStill stuck? Send our support team a message or email support@keirton.com. Include the puck name, software version and the step where it stops.