Cure Puck Generation 1

I bought one to try it out. Back for 6 more. I use it to monitor my dryroom remotely from the app. No more guessing when my dry is done. Once it averages 60% RH, I trim and cure. I learned to reduce my dry time from 10 days to 9 days and now cure for 10 days. Flower comes out amazing. Appreciate the innovation.

I would give 5 stars but I waited for 3 months to get mine. Then when I went to order 4 more, I have to wait another month. Get it together folks! Awesome product, well thought out. Just hurry up!

My first order came damaged and was replaced. My second and third order came damaged from shipping. Frustrating when you need something and it shows up broken multiple times. The last box looked like it got spiked like a football.

This thing is legit.So many dummy’s talk like they know how to cure.Bunch of fools running around poppin lids with no idea when or why.Hit play and this thing goes on autopilot!

Gettin the grease everytime.

Your motto should be ‘Make it stick’

My flower often ended up dry and crumbling before the cure puck. I have learned so much from it on what I need to do differently in my dryroom so that I can properly cure. I was overdrying becuase I was afraid it would be too wet in the cure. Been nailing it the last 4 rounds. Never had flower this sticky or smell so good. If you have a sponsorship program – please let me know how to sign up.

I’m sure you will block this review. Why do you feel the need to automate everything!?! What ever happen to artisan and hand crafted. Curing was the one thing that allowed those of us who were good to seperate themselves from the rest. Now you just give that ability to every Tom, Dick, and Harry.

Did one run so far and loved it . I had an issue with it not being disconnected from their server which wouldn’t allow me to connect to my wife and they sent me another one right away without the one I was sending back even arriving yet. Doing second cure now and will be buying a second puck very shortly . Customer relations is awesome. I had a few questions and the ceo called me directly to answer . Highly recommend *****

Twister with another killer product.
This will help improve cannabis quality world wide

Love how ya’ll take feedback quickly and put it into the product!

I’m really impressed with the cure puck so far. The accuracy and response time is a huge step up from the little hygrometers that a lot of us are used to. I was also surprised by how much the CO2 level can rise in a sealed curing container between burps. The control the cure puck gives over the curing process is also impressive with its start and stop limits and quick sensor response time. You can set the amount of time you want the air exchange for and when the next exchange will be as well.

Currently I have almost the entire plant cut into branches and have it curing in a 30 gallon food grade drum approx 2/3 full controlled by the cure puck. It screwed right into the port in the lid without any problems. I feel alot more comfortable curing this round than I have in the past as well it’s nice to know you have something watching over your hard work.

I’ve relied a lot on the “stem snap” technique over the years and more recently have tried wood moisture meters with some success but putting the flower I think is dry/almost dry into a curing container and letting the RH stabilize has proven to be alot more effective. It can be a little stressful leaving your crop in a container with a cheap hygrometer hoping it doesn’t climb too far past 63 while your asleep. But having a container that can burp itself if it gets past your comfort limit and knowing the sensors are more accurate, more reliable and quicker responding than the usual curing hygrometer is great peace of mind.

The only downsides I’ve found with the cure puck itself is that the pump makes a bit of noise when it’s exchanging air and it’s worth noting that after an air exchange the air temp in the container may rise slightly above the room air temp (1-2f approx).

The cure puck is definitely worth looking into if you think you might have some room for improvement, want more control/data during cure or have a decent amount of material to cure 5 gal to 55 gal plus and want to help automate the process.

Flippin great idea absolutely awesome idea I don’t have one personally but I wish I did the cash at the moment but when I get it I’m gonna have at least one of those I need about six but one will work for now sweet

I was selected as a test partner to torture test the puck. I can say this group is first class. They were very quick to respond to any issues and made changes rapidly. I found the puck to be very helpful in my process. First thing I discovered was all my hygrometers throughout my building are out of calibration – including all our Troll Masters. The second thing I noticed is our dryroom fluctuates far more than we were aware of. It explains our inconsistent results. The third thing we discovered is we were overdrying our flower during trimming. We have since switched our entire process and now consistently produced sticky flower. Prior to all this learning, it was hit and miss. We relied on specific people who had ‘the touch’ to know when to burp and package. Very positive experience so far. Thanks Folks.

Such a cool tool. Love how accurate it is. I use it to verify and calibrate other sensors. The regular updates and improvements are awesome. It just keeps getting better.

Great Tech. High quality. Solid Customer Service.

I’ve been very happy with the level of service from this group. I had some issues with my puck and they were very quick to solve the problems. First class.

I had an original cure puck, unitl it had an issue recently and they sent me a new one (gen 3 I think they called it). It is nicer than the original. It is made of better materials and it has improved software. Great customer service btw.