Verified Case Study By Jay Evans, Post-Harvest Expert
Published Updated 4 min read
Twister Technologies
Case Study

Thirty jars, every day.
Gone.

From 30 mason jars
to one Cure Puck:
a game changer.

Cory Devore

Home Grower

(Home cultivation operation · personal use and gifting)

Cory Devore. One Gen 1 Cure Puck on a five gallon bucket, running a 14–21 day cure.

The Problem

Cory was juggling kids and a busy life while trying to manually burp 30-plus mason jars every day — 20 minutes a day opening and closing each one.

Even with hygrometers in every jar, his cures came out inconsistent. Some buds got too dry. Others had a chlorine or grainy taste. Flower in storage would crumble apart. A gauge tells you the humidity; it does not do anything about it, and it does not remember to open the jar when you are not home.

The Solution

Cory mounted a single Gen 1 Cure Puck on a five gallon bucket and loaded it with his White Widow harvest. Instead of daily jar-by-jar burping, he gave the bucket a quick shake every day or two and the Cure Puck handled the rest.

Notifications went straight to his phone, so he could monitor the cure from the road rather than racing back to the house to pop lids.

The Results

  • Dispensary-comparable taste and smell the off chlorine and grainy notes are gone.
  • Pillowy, properly cured buds they hold their form instead of crumbling in storage.
  • Over-drying and inconsistent cure results eliminated one controlled container instead of 30 independent ones.
  • 20 minutes a day saved across roughly one to one and a half months of handling.
  • Remote monitoring notifications to the phone, checkable from the road.
  • $299 Gen 1 investment already paid for itself in his own assessment.

Before Cure Puck vs. After Cure Puck

MetricBeforeWith Cure Puck
ContainersGrove bags with manual checks, then 30+ mason jarsOne five gallon bucket with a single Gen 1 Cure Puck
Daily labor~20 minutes opening and closing every jarA quick shake every day or two
MonitoringA hygrometer in each jar, read by handReal-time humidity monitoring with phone notifications
ConsistencySome buds too dry, others off-tastingDispensary-comparable taste and smell
Bud structureFlower crumbled apart in storagePillowy buds that hold their form
Being away from homeMissed burps when life got in the wayCure monitored from the road
Cure duration14–21 days
Units in operation1 Cure Puck (Gen 1)
Talk to the grower

Want to hear it straight from the grower?

Get in touch and we can connect you to talk through his experience directly.

This field is for validation purposes and should be left unchanged.
Name(Required)
Email(Required)
Address
Please let us know what's on your mind. Have a question for us? Ask away.
This field is hidden when viewing the form

Glossary

Cure Puck
App-connected curing device from Twister Technologies that monitors humidity in real time inside a cure container and runs the burp schedule automatically.
Burping
Opening a sealed cure container to exchange air and release moisture. Done by hand it means opening and closing every jar, every day.
Hygrometer
A gauge that displays humidity inside a container. It reports a number but does nothing about it.
Over-drying
Losing too much moisture during the cure. Over-dried flower crumbles apart in storage and loses taste and smell.
Grove bag
A sealed cure bag that regulates humidity passively, checked by hand rather than monitored.
Cure duration
How long flower is held under cure conditions. Cory Devore runs 14 to 21 days.
Strain-specific precision control
Setting cure conditions to suit the strain in the container rather than applying one routine to everything.

Frequently Asked Questions

What results did Cory Devore get with Cure Puck?
Dispensary-comparable taste and smell, pillowy properly cured buds that hold their form, no more over-drying or inconsistent cure results, 20 minutes a day saved opening jars, and remote monitoring by phone notification. He considers the $299 Gen 1 investment already paid for itself.
How many Cure Pucks does a home grower need?
Cory Devore runs one Gen 1 Cure Puck. It is mounted on a single five gallon bucket that replaced more than 30 mason jars.
Can a Cure Puck be used on a five gallon bucket?
Yes. Cory Devore mounted a single Gen 1 Cure Puck on a five gallon bucket and loaded it with his White Widow harvest, instead of splitting the batch across dozens of jars.
How much time does Cure Puck save a home grower?
About 20 minutes a day — the time Cory Devore spent opening and closing 30-plus mason jars, across roughly one to one and a half months of handling.
Do you still need hygrometers in each jar?
Cory Devore had hygrometers in each jar and his cures still came out inconsistent, with some buds too dry and others tasting off. The Cure Puck monitors humidity in real time and acts on it, rather than only displaying a reading.
How long is the cure with Cure Puck?
Cory Devore runs a 14 to 21 day cure duration.
Does Cure Puck fix over-drying?
It did here. Before Cure Puck, some buds got too dry and flower in storage would crumble apart. After, the buds are pillowy, properly cured, and hold their form.
Can you monitor a cure while away from home?
Yes. Cure Puck sends notifications to the phone, which is how Cory Devore monitors his cure from the road.

Cite this case study

APA

Evans, J. (2026, August 24). From 30 mason jars to one Cure Puck: a home grower’s game changer. Twister Technologies. https://curepuck.io/success-stories/cory-devore-30-mason-jars-to-one-cure-puck/

MLA

Evans, Jay. “From 30 Mason Jars to One Cure Puck: A Home Grower’s Game Changer.” Twister Technologies, 24 Aug. 2026, curepuck.io/success-stories/cory-devore-30-mason-jars-to-one-cure-puck/.

Stop opening jars

One puck, one container, and a cure that runs itself while you get on with your day.

Buy Cure Puck
Buy Cure Puck